solid state sensors ss400 series digital position sensors 8 honeywell 1 micro switch sensing and control 1 1-800-537-6945 usa 1f 1-815-235-6847 international 1 1-800-737-3360 canada features 1 3.8-30 vdc supply voltage 1 digital current sinking output 1 3 pin in-line pcb terminals 1 quad-hall design virtually eliminates mechanical stress effects 1 temperature compensated magnetics 1 operate/release points can be customized 1 bipolar, unipolar, latching magnetics 1 high output current capability 50 ma absolute maximum 1 operate/release points symmetrical around zero gauss (bipolar/latch) 1 operating temperature range of 40 to + 150 c (40 to + 302 f) 1 package material: plaskon 3300h 1 surface mount version available: ss400-s (with cut and formed leads) ss400 series position sensors have a thermally balanced integrated circuit over full temperature range. the negative compensation slope is optimized to match the negative temperature coeffi- cient of lower cost magnets. bipolar, latching and unipolar magnetics are available. band gap regulation provides extremely stable operation over 3.8 to 30 vdc sup- ply voltage range. ss400 sensors are ca- pable of continuous 20 ma sinking out- put, and may be cycled as high as 50 ma maximum. notice interruption of power to a latching de- vice may cause the output to change state when power is restored. if a mag- netic field of sufficient strength is pre- sent, the sensor output will be in the condition dictated by the magnetic field. order guide catalog listing ss411a ss413a ss441a ss443a ss449a ss461a ss466a magnetic type bipolar bipolar unipolar unipolar unipolar latching latching supply voltage (vdc) 3.8 to 30 3.8 to 30 3.8 to 30 3.8 to 30 3.8 to 30 3.8 to 30 3.8 to 30 supply current (max.) 10 ma 10 ma 10 ma 10 ma 10 ma 10 ma 10 ma output type sink sink sink sink sink sink sink output voltage (max.) .40 v .40 v .40 v .40 v .40 v .40 v .40 v output current, max.* 20 ma 20 ma 20 ma 20 ma 20 ma 20 ma 20 ma output leakage current, max. 10 m a10 m a10 m a10 m a10 m a10 m a10 m a output switching time v cc =12 v, r l =1.6 k, c=20 pf rise (10-90%) .05 m s typ. .05 m s typ. .05 m s typ. .05 m s typ. .05 m s typ. .05 m s typ. .05 m s typ. 1.5 m s max. 1.5 m s max. 1.5 m s max. 1.5 m s max. 1.5 m s max. 1.5 m s max. 1.5 m s max. fall (90-10%) .15 m s typ. .15 m s typ. .15 m s typ. .15 m s typ. .15 m s typ. .15 m s typ. .15 m s typ. 1.5 m s max. 1.5 m s max. 1.5 m s max. 1.5 m s max. 1.5 m s max. 1.5 m s max. 1.5 m s max. magnetic characteristics g mt g mt g mt g mt g mt g mt g mt 40 c max. op. 70 7.0 140 14.0 135 13.5 215 21.5 435 43.5 110 11.0 200 20.0 min. rel. 70 7.0 140 14.0 20 2.0 80 8.0 210 21.0 110 11.0 200 20.0 min. dif. 15 1.5 20 2.0 15 1.5 25 2.5 30 3.0 50 5.0 200 20.0 0 c max. op. 65 6.5 140 14.0 117 11.7 190 19.0 400 40.0 90 9.0 185 18.5 min. rel. 65 6.5 140 14.0 20 2.0 80 8.0 230 23.0 90 9.0 185 18.5 min. dif. 15 1.5 20 2.0 18 1.8 25 2.5 30 3.0 50 5.0 200 20.0 25 c max. op. 60 6.0 140 14.0 115 11.5 180 18.0 390 39.0 85 8.5 180 18.0 min. rel. 60 6.0 140 14.0 20 2.0 75 7.5 235 23.5 85 8.5 180 18.0 min. dif. 15 1.5 20 2.0 20 2.0 25 2.5 30 3.0 50 5.0 200 20.0 85 c max. op. 60 6.0 140 14.0 120 12.0 180 18.0 400 40.0 85 8.5 180 18.0 min. rel. 60 6.0 140 14.0 15 1.5 70 7.0 215 21.5 85 8.5 180 18.0 min. dif. 12 1.2 20 2.0 15 1.5 15 1.5 30 3.0 50 5.0 190 19.0 125 c max. op. 65 6.5 140 14.0 123 12.3 190 19.0 410 41.0 100 10.0 180 18.0 min. rel. 65 6.5 140 14.0 15 1.5 60 6.0 200 20.0 100 10.0 180 18.0 min. dif. 12 1.2 20 2.0 8 0.8 10 1.0 30 3.0 50 5.0 160 16.0 150 c max. op. 70 7.0 140 14.0 125 12.5 200 20.0 420 42.0 110 11.0 185 18.5 min. rel. 70 7.0 140 14.0 10 1.0 55 5.5 185 18.5 110 11.0 185 18.5 min. dif. 10 1.0 20 2.0 5 0.5 5 0.5 30 3.0 50 5.0 140 14.0 * absolute maximum output current is 50 ma for all ss400 listings. g = gauss. mt = millitesla. note: for ss400 on tape with straight or formed leads on 0.100 n centers, contact the 800 number. one box contains 5,000 sensors. pdfinfo p a g e - 0 0 8
solid state sensors ss400 series digital position sensors honeywell 1 micro switch sensing and control 1 1-800-537-6945 usa 1f 1-815-235-6847 international 1 1-800-737-3360 canada 9 operate and release points ss411a ss443a ss466a ss413a ss449a ss441a ss461a mounting dimensions (for reference only) tape style t2 tape style t3 tape styles t2 and t3 are supplied in ammopack (fanfold) format, in cardboard boxes. each box contains 5000 sensors. standard lead version surface mount (-s) version reduced lead length (-r) version tape style sp & rp direction of feed from reel digital pdfinfo p a g e - 0 0 9
|
